- Lampu LED Inframerah -

503FIRC-74L / 14I100-45A

Ora mung LED inframerah 730nm sing bisa digunakake ing terapi LED inframerah , nanging uga LED 730nm, LED 740nm, LED 760nm sing bisa digunakake ing macem-macem mesin terapi LED IR. Uga ana macem-macem sudut pandang ing LED liwat-bolongan iki sing dipilih. Sudut ndeleng sing beda-beda bakal ngasilake asil cahya sing beda-beda, sampeyan bisa milih salah siji kanggo proyek sampeyan. Apa sampeyan butuh emitor LED 740nm kanggo proyek kasebut? Hubungi kita ngerti, produk iki kanthi umur linuwih kanthi umur dawa lan konsumsi daya sithik ora bakal nguciwani sampeyan. Kaya sing kita ngerteni, LED inframerah ngetokake lampu abang nalika bisa digunakake. Apa sampeyan mikir kabeh LED inframerah ora bisa dideleng karo mripat kita? Banjur sampeyan bisa uga salah ing kasus iki ~ Nanging yen dawa gelombang luwih dawa, padhange sing kurang abang bakal ditindakake. Kaya sing wis dingerteni, ana kekuwatan sing kuat nalika nggunakake dioda laser 740nm, sampeyan kudu nggunakake kanthi tliti supaya ora bisa ngobong awak dhewe. Nanging kanggo iki, kita rangkep nganggo chip LED 740nm lan lensa bening. Sing mung diode emitting cahya .

- Ukuran LED Liwat bolongan 5 mm -

- Sinar LED LED liwat bolongan -

* Warna ing foto dijupuk nganggo kamera, waca warna sing asli kanggo standar.

- Parameter LED Liwat-bolongan -

Rating Maksimum Mutlak Ing Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Karakteristik Optik lan Listrik ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.4	1.6	1.9	V	IF=20mA
		1.8	1.9	2.3	V	IF=60mA
		1.9	2.0	2.5	V	IF=100mA
Luminous Flux	Φ		0.05		lm	IF=20mA
			0.12		lm	IF=60mA
			0.16		lm	IF=100mA
Luminous Power	PO	8		15	mw	IF=20mA
		20		35	mw	IF=60mA
		35		50	mw	IF=100mA
Radiant Intensitye	Ee	40		60	mw/sr	IF=100mA
Peak Wavelength	λP	735	740	745	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Sambungan kawat emas -

* Supaya saben umur dawa LED, pabrik BestLED nggunakake kawat emas murni dhuwur kanggo sambungan sirkuit ing njero

- LED Packing -

* Kita bisa ngemas LED iki kanthi pirang-pirang paket lan nutupi utawa mbengkongake pin LED minangka sarat sampeyan.

- LED IR sing gegandhengan -

- Proses Produksi -

- LED IR bolongan bolongan -