- 660nm LED -

5050FRC-66L / 14

0,2W SMD LED 5050 3-chip 660nm LED minangka diode pemancar lampu abang sing jero, sing akeh digunakake ing industri kecantikan, tuwuh tanduran, suplemen cahya, utawa sawetara aplikasi khusus liyane. Amarga regane 660nm LED, LED abang iki ora pati misuwur ing proyek pencahayaan LED utawa Lampu LED. Nanging, 660nm LED isih dadi populer amarga efek. Dibandhingake karo LED bolongan kanthi 660nm, 660nm SMD LED bakal entuk kinerja sing luwih apik nalika disipasi panas. Saliyane, SMD LED uga entuk ukuran luwih cilik tinimbang LED liwat bolongan, sing luwih gampang dipasang karo papan PCB lan mesin las otomatis. Kaya sing kita ngerteni, ana posisi telu ing 5050 SMD LED. Dadi Kasus LED 5050 SMD bisa dikemas ing 3 chip ing njero. Kanggo sawetara proyek, mung siji chip bisa uga ora bisa nggayuh sarat kasebut. Kanggo nambah output lan radiasi ing siji LED, kita bakal ngemas nganggo 3 chip LED sing padha dadi 5050 SMD LED supaya bisa nggayuh radiasi utawa padhange. Ana jinis chip LED sing bisa dikemas ing siji 5050 SMD LED, sing bisa dadi 3 chip sing beda utawa 3 chip sing padha. Babar pisan karo sarat sampeyan. Yen siji chip LED 660nm ora bisa nyukupi sarat sampeyan, iki ora bakal nguciwani sampeyan. Output cahya seragam, reliabilitas negara sing dawa umure lan konsumsi daya sithik minangka kaluwihan saka 3 chip 660nm SMD LED iki. Hubungi kita kanggo rincian liyane babagan ~

- Ukuran Parameters-

Kasus LED SMD iki uga kasedhiya kanggo LED IR, LED UV, LED SMD Biru, LED SMD Abang, LED Amber dll.

- Emit Warna -

- Parameter Listrik -

Rating Maksimum Mutlak Ing Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	180mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	60mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Karakteristik Optik lan Listrik ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.8	1.9	2.3	V	IF=60mA
		1.9	2.1	2.4	V	IF=180mA
		2.0	2.2	2.5	V	IF=300mA
Luminous Intensity	ΦVI	2.7		3.8	lm	IF=60mA
		9		13	lm	IF=180mA
		12		18	lm	IF=300mA
Lumiuous Power	PO	35		55	mw	IF=60mA
		120		180	mw	IF=180mA
		200		300	mw	IF=300mA
Peak Wavelength	λP	655	660	665	nm	IF=60mA
Dominant Wavelenth	λd	640	645		nm	IF=60mA
Half Width	Dl		17		nm	IF=60mA
Viewing Half Angle	2q1/2		±60		deg	IF=60mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Sambungan Kawat Emas -

- Pengepakan -

* Kita rangkep nganggo kemasan vakum sawise tape kasebut minangka rol

- Aplikasi -

- LED Abang sing gegandhengan -

- Produksi -

- 660nm SMD LED Gunakake -