- Infrared ikanam oriọna -

503FIRC-70L / 14I100-60A

700nm IR LED dị na Shenzhen Best LED Opto-electronic Co., Ltd. Ogologo oge kachasị elu bụ 700nm, na-elele anya ogo 60 ( ± 30 Celsius ), nha nha bụ 350um * 350um, mmepụta ike mW @ 20mA na ụdị voltage 1.8V kachasị elu. 2.3V @ 20 MA. Anyị ejirila 700nm infrared LED na lens epoxy mm. Dị ka a na-onu-ikanam, e nwere iche iche nke ikiri n'akuku maka họrọ, ma ọ bụrụ na nke a 60 ogo ikiri n'akuku nwere ike ghara izute gị chọrọ, dị nnọọ na-eche free ịkpọtụrụ anyị na ka anyị mara gị ase. Mgbe ahụ, anyị ga-emepụta ya dị ka ngwa gị. Na mgbakwunye, maka 700nm LED, enwere ụdị ụzọ ngwungwu dị na ụlọ ọrụ kacha mma kacha mma, dịka anyị nwere ike ịgbanwe agba nke oghere ka ọ dị ka acha anụnụ anụnụ ma ọ bụ acha anụnụ anụnụ dị ka ngwa gị, ọ bụrụ na nha 5mm buru oke ibu maka gị, anyị nwere ike iji 3mm ect mee ya. Yo ga-achọ ụfọdụ 700nm LED maka ọrụ gị? Kpọtụrụ anyị maka nkọwa zuru ezu ~

- Size 5 mm Site-oghere ikanam -

* Nkọwa dị mkpirikpi bụ cathode *

* Ndị a 5mm site-onu Ikanam bụkwa maka odo ikanam, Amber ikanam, UV ikanam na ndị ọzọ Iye Ikanam ect *

- Site-onu Ikanam radiant -

* Igwefoto sere foto dị na foto ahụ, biko were agba agba dị ka ọkọlọtọ.

- 700nm ikanam XY -

- Ntọala eletriki -

Ọnụ ọgụgụ kachasị elu na Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Njirimara Anya na Eletriki ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.7	1.8	2.4	V	IF=20mA
		1.9	2.1	2.5	V	IF=60mA
		2.0	2.2	2.6	V	IF=100mA
Luminous Flux	Φ		0.15		lm	IF=20mA
			0.35		lm	IF=60mA
			0.4		lm	IF=100mA
Luminous Power	PO	5		12	mw	IF=20mA
		20		35	mw	IF=60mA
		25		40	mw	IF=100mA
Radiant Intensity	Ee	50		60	mw/sr	IF=100mA
Peak Wavelength	λP	695	700	710	nm	IF=20mA
Half Width	Dl		17		nm	IF=20mA
Viewing Half Angle	2q1/2		±60		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

* Iji mee ka onye ọ bụla n'ime ogologo ndụ ọkụ, ụlọ ọrụ BestLED jiri waya ọla edo dị elu maka njikọ njikọ

- Ikanam mbukota -

* Anyị nwere ike abịa a ikanam ọ bụla ọnụ ọgụgụ nke nchịkọta na taped ma ọ bụ gbagọrọ agbagọ Ikanam atụdo ka gị chọrọ.

- Ezitere -

- Production Usoro -

- T hrough-onu Iye ikanam -