Ere Ngwa:	Piece/Pieces
Agedị ngwugwu:	Igbe katoonu

I chere na ndi mmadu nile na - eme ka anyi ghara ihu n'anya anyi? Mgbe ahụ ị ga - eme ka ọ dị njọ na ikpe a ~ infrared na - eme ka ọkụ na - acha ọbara ọbara mgbe ha na-arụ ọrụ. Mana ebili mmiri ndị ọzọ, na-acha uhie uhie na-acha uhie uhie ka ị ga-aga n'ihu. Dị ka anyị maara, enwere ike siri ike mgbe ị jiri Dider 770nm laser 770NM, ịkwesịrị iji ya nwayọ ma ọ bụrụ na ị ga-agba onwe gị ọkụ. Mana maka nke a, anyị na-egbochi nke a 770NM COMS na oghere doro anya. Nke bụ naanị ọkụ na-eme ka dideodi dị na 503fic-73l / 14I100-60A. A na-ejikarị infrared infrared na-ejikarị ya mee ihe n'ọtụtụ ebe na-eto ọkụ, igwe na-eji ọgwụ mgbochi igwe. E nwere ụdị obiọma na-elele akụkụ na nke a site na onulu ya mere maka ịhọrọ. Akụkụ nlele dị iche iche ga-eme ka ọ bụrụ nsonaazụ ọkụ dị iche iche, ị nwere ike ịhọrọ otu n'ime ha maka ọrụ gị. Need chọrọ ihe dị ka 770NM Cond Emitter maka ọrụ gị? Kpọtụrụ anyị maara, ngwaahịa a nwere ezigbo ọnọdụ steeti na-agbanwe agbanwe na ikike ike dị ala na-ekwe ka iwe mee gị.

- Size: 5.0*H8.7mm - Chip Number:1 chip - Color: 770nm LED - Type: water clear - Chip brand: Tyntek

- Different color are available - Different wavelength are available - Warranty: 5 Years - RoHS, REACH, EN62471

- Uniform light output - Long life-solid state reliability - Low Power consumption -Anti UV epoxy resin package -High temperature resistance

- nha nke 5 mm site na oghere -

* Nke a na-aga site na ngwugwu STUD dị na UV, Damber duziri, 5mm akwụkwọ ndụ akwụkwọ ndụ na-eduga, 5mm na-acha anụnụ anụnụ site na oghere oghere

- site na oghere na-acha odo odo -

* Igwefoto were na foto a, biko tinye agba dị ka ọkọlọtọ.

- Okpokota eletriki -

Ogo zuru oke na TA = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	230mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
1000pcs weight	Bag	0.31g
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Njiri mara na eletriki ( t c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.5	1.6	1.8	V	IF=20mA
		1.7	1.8	2.1	V	IF=60mA
		2.0	2.3	2.5	V	IF=100mA
Luminous Flux	Φ		0.03		lm	IF=20mA
			0.09		lm	IF=60mA
			0.14		lm	IF=100mA
Luminous Power	PO	15		25	mw	IF=20mA
		45		55	mw	IF=60mA
		70		90	mw	IF=100mA
Radiant Intensity	Ee	80		90	mw/sr	IF=100mA
Peak Wavelength	λP	760	770	780	nm	IF=20mA
Half Width	Dl		17		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.