- nha nke 5 mm site na oghere -

* Nke a na-aga site na ngwugwu STUD dị na UV, Damber duziri, 5mm akwụkwọ ndụ akwụkwọ ndụ na-eduga, 5mm na-acha anụnụ anụnụ site na oghere oghere

- site na oghere na-acha odo odo -

* Igwefoto were na foto a, biko tinye agba dị ka ọkọlọtọ.

- Okpokota eletriki -

Absolute Maximum Ratings At Ta=25℃  Parameter Symbol Rating Power Dissipation Pd  200mw  Pulse Forward Current IFP  300mA  Forward Current IF  100mA  Reverse Voltage VR 5V Junction Temperature Tj 115°C Operating Tempertature Topr -40 - +80°C Storage Tempertature Tstg -40 - +100°C Soldering Temperature Tsol 260°C Electro-Static-Discharge(HBM) ESD 3000v Warranty Time 5Years Antistatic bag Piece 1000Back *Pulse Forward Current Condition:Duty 1% and Pulse Width=10us. *Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C Njiri mara na eletriki ( t c = 25 ℃ ) Parameter Symbol Min Typ Max Unit Test Condition Forward Voltage VF 1.5  1.6 1.9 V IF=20mA 1.6 1.8 2.1 V IF=60mA 1.9 2.0 2.5 V IF=100mA Luminous Flux Φ 0.04 lm IF=20mA 0.1 lm IF=60mA 0.14 lm IF=100mA Luminous Power PO 6 15 mw IF=20mA 20 35 mw IF=60mA 35 50 mw IF=100mA Radiant Intensity Ee 70 80 mw/sr IF=100mA Peak Wavelength λP 750 760 nm IF=20mA Half Width Dl 24 nm IF=20mA Viewing Half Angle 2q1/2 ±30 deg IF=20mA Reverse Current IR 10 uA VR=5V *Luminous Intensity is measured by ZWL600. *q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. *lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

* Iji mee ka onye ọ bụla nke ndụ ogologo nke Tright, nke kachasị mma na-eji ọla edo ọla edo dị elu maka njikọ sekit

- Nchikota ngwongwo -

* Anyị nwere ike ibunye nke a na ngwugwu ọ bụla ma tee ya ma ọ bụ gbagọrọ atụ ka ihe ị chọrọ.