- Infrared ikanam oriọna -

503FIRC-74L / 14I100-45A

Ọ bụghị nanị na 730nm infrared ikanam ike ga-eji na infrared ikanam ọgwụ, ma 730nm ikanam, 740nm Ikanam, 760nm ikanam nwere ọtụtụ-eji iche iche nke Iye ikanam ọgwụ igwe. Enwekwara uzo di iche iche di iche iche n’elu uzo oghere gi nke hotara. Dị iche iche ikiri n'akuku ga-eme ka dị iche iche ọkụ N'ihi, ị nwere ike họrọ onye ọ bụla n'ime ha maka oru ngo. Need chọrọ ụfọdụ 740nm ikanam emitter maka ọrụ gị? Kpọtụrụ anyị mara, ngwaahịa a nwere ogologo ndụ siri ike na steeti a pụrụ ịdabere na obere ike oriri agaghị ahapụ gị mmechuihu. Dị ka anyị si mara, ọkụ infrared na-eme ka ọkụ na-acha ọbara ọbara mgbe ha na-arụ ọrụ. Ì chere na infrared ikanam enweghị ike ịhụ anya nkịtị? Mgbe ahụ ị nwere ike nweta ya na-ezighi ezi na nke a. Ma ka ogologo wavelength nke, obere uhie nchapụta ị ga-enweta. Dị ka anyị si mara, enwere ike mgbe ị na-eji 740nm laser diode, ị ga-eji ya nke ọma ma ọ bụghị na ị ga-agba onwe gị ọkụ. Mana maka nke a, anyị ejiri 740nm LED chip na anya doro anya tinye nke a. Nke bụ naanị ọkụ na- enye ọkụ.

- Size 5 mm Site-oghere ikanam -

- Site-onu Ikanam radiant -

* Igwefoto na-ese agba dị na foto ahụ, biko were agba agba dị ka ọkọlọtọ.

- Site-onu ikanam oke -

Ọnụ ọgụgụ kachasị elu na Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Njirimara Anya na Eletriki ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.4	1.6	1.9	V	IF=20mA
		1.8	1.9	2.3	V	IF=60mA
		1.9	2.0	2.5	V	IF=100mA
Luminous Flux	Φ		0.05		lm	IF=20mA
			0.12		lm	IF=60mA
			0.16		lm	IF=100mA
Luminous Power	PO	8		15	mw	IF=20mA
		20		35	mw	IF=60mA
		35		50	mw	IF=100mA
Radiant Intensitye	Ee	40		60	mw/sr	IF=100mA
Peak Wavelength	λP	735	740	745	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Njikọ waya ọla edo -

* Iji mee ka onye ọ bụla n'ime ogologo ndụ ọkụ, ụlọ ọrụ BestLED jiri waya ọla edo dị elu maka njikọ njikọ

- Ikanam mbukota -

* Anyị nwere ike abịa a ikanam na ihe ọ bụla ọnụ ọgụgụ nke nchịkọta na taped ma ọ bụ gbagọrọ agbagọ Ikanam atụdo dị ka gị chọrọ.

- Ikanam ikanam -

- Production Usoro -

- T hrough-onu Iye ikanam -