- 680nm ikanam -

3020KP-68L

- Akụkụ Dimension -

Ihe ndị a SMD LED ahụ dịkwa maka IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Emitting Agba -

* Igwefoto na-ese agba dị na foto ahụ, biko were agba agba dị ka ọkọlọtọ.

- Ntọala eletriki -

Ọnụ ọgụgụ kachasị elu na Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	100mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	50mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	2000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Njirimara Anya na Eletriki ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.7	1.9	2.4	V	IF=50mA
			2.3	2.6	V	IF=100mA
			3.0		V	IF=300mA
Luminous Flux	IV		0.5		lm	IF= 50mA
			1		lm	IF=100mA
			3		lm	IF=300mA
Luminous Power	PO		50		mw	IF=50mA
			100		mw	IF=100mA
			300		mw	IF=300mA
Peak Wavelength	λP		680	690	nm	IF=50mA
Half Width	Dl		25		nm	IF=50mA
Viewing Half Angle	2q1/2		±60		deg	IF=50mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Njikọ ọla edo ọla edo -

- Mbukota -

* Anyị na-agbakọta ya na ngwugwu agụụ mgbe teepu ya dị ka eriri

- Ngwa -

- Red ikanam metụtara -

- Mmepụta -

- Jiri -