- 625nm ikanam -

5050FRC-62L / 10

Common 5050 SMD LED nwere akara 6, enwere mkpịsị aka atọ n'akụkụ ọ bụla nke SMD LED. Ọ bụla atụdo ga-ejikọ a Ikanam mgbawa n'ime na cathode ma ọ bụ anode. Dị ka anyị pụrụ ịhụ na foto a, ndị a 5050 SMD Ikanam nwere atọ mgbawa n'ime, atọ ndị a mgbawa dị ka yiri njikọ n'ime nke SMD ikanam. Kedu nke nwere ike ibugharị 3 ibe n'otu oge na 60mA ugbu a. 5050FRC-62L / 10 bụ SMD 625nm LED nwere 3 245 * 245um n'ime, nchapụta nwere ike iru 1500-2500nm mgbe ọ na-arụ ọrụ. Nke kacha dị ogologo bụ 620-625nm na ogologo ogologo ya bụ 630-635nm. Ndị a bụ nchacha uhie uhie SMD LED, na ike bụ 0.2W. Shenzhen Best LED Opto-electronic Co., Ltd nwekwara ike ịnye 630nm, 635nm, 640nm, 645nm, 660nm, 680nm, 700nm, 710nm, 720nm, 730nm, 740nm, 750nm, 760nm, mere, 770nm mere, 780nm mere, 790nm mere, 800nm mere, 810nm mere, 820nm mere, 830nm mere, 840nm mere, 850nm mere, 860nm mere, 870nm mere, 880nm mere, 890nm mere, 900nm mere, 9 20nm mere, 940nm ada , 950nm duru, 980nm duru, 1000nm duru, 1050nm duru, 1100nm duru, 1200nm duru, 1300nm duru, 1500nm duru ect. Ọ bụrụ na ịchọrọ Ikanam ọ bụla banyere nke a, biko c ontact anyị maka nkọwa ndị ọzọ gbasara ya ~

- Dimension Parameters-

Ihe ndị a SMD LED ahụ dịkwa maka IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Emitting Agba -

- Ntọala eletriki -

Ọnụ ọgụgụ kachasị elu na Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	180mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	60mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Njirimara Anya na Eletriki ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.9	2.1	2.4	V	IF=60mA
			2.3	2.6	V	IF=180mA
			2.4	2.8	V	IF=300mA
Luminous Flux	ΦVI	6		9	lm	IF=60mA
				25	lm	IF=180mA
Luminous Intensity	IV	1500		2500	mcd	IF=60mA
Lumiuous Power	PO	35		55	mw	IF=60mA
				180	mw	IF=180mA
				300	mw	IF=300mA
Peak Wavelength	λP		632		nm	IF=60mA
Dominant Wavelenth	λd	620	625	630	nm	IF=60mA
Half Width	Dl		16		nm	IF=60mA
Viewing Half Angle	2q1/2		±60		deg	IF=60mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Njikọ ọla edo ọla edo -

- Mbukota -

* Anyị na-agbakọ ya na ngwongwo agụụ mgbe teepu ya dị ka eriri

- Ngwa -

- Red ikanam metụtara -

- Mmepụta -

- SMD ikanam Iji -