- gwosè 5 mm nan twou ki ap dirije -

*Sa a nan-twou ki ap dirije pake yo disponib tou nan UV ki ap dirije, Amber dirije, jòn ki ap dirije, 5mm vèt nan-twou ki ap dirije, 5mm ble nan-twou ki ap dirije ECT.*

- atravè -twou dirije radyan -

*Koulè nan foto a te pran pa kamera, tanpri pran aktyèl émettant koulè kòm estanda.

- Paramèt elektrik -

Absolute Maximum Ratings At Ta=25℃  Parameter Symbol Rating Power Dissipation Pd  200mw  Pulse Forward Current IFP  300mA  Forward Current IF  100mA  Reverse Voltage VR 5V Junction Temperature Tj 115°C Operating Tempertature Topr -40 - +80°C Storage Tempertature Tstg -40 - +100°C Soldering Temperature Tsol 260°C Electro-Static-Discharge(HBM) ESD 3000v Warranty Time 5Years Antistatic bag Piece 1000Back *Pulse Forward Current Condition:Duty 1% and Pulse Width=10us. *Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C Karakteristik optik ak elektrik ( t c = 25 ℃ ) Parameter Symbol Min Typ Max Unit Test Condition Forward Voltage VF 1.5  1.6 1.9 V IF=20mA 1.6 1.8 2.1 V IF=60mA 1.9 2.0 2.5 V IF=100mA Luminous Flux Φ 0.04 lm IF=20mA 0.1 lm IF=60mA 0.14 lm IF=100mA Luminous Power PO 6 15 mw IF=20mA 20 35 mw IF=60mA 35 50 mw IF=100mA Radiant Intensity Ee 70 80 mw/sr IF=100mA Peak Wavelength λP 750 760 nm IF=20mA Half Width Dl 24 nm IF=20mA Viewing Half Angle 2q1/2 ±30 deg IF=20mA Reverse Current IR 10 uA VR=5V *Luminous Intensity is measured by ZWL600. *q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. *lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

* Pou yo ka kenbe chak youn nan long validite ki ap dirije a, bestled faktori itilize segondè fil lò pi bon kalite pou anndan koneksyon sikwi

- dirije anbalaj -

*Nou ka pake sa a te mennen ak nenpòt ki kantite pakè ak kole oswa pliye broch yo ki ap dirije kòm kondisyon ou.