- gwosè nan 5 mm IR nan -twou dirije -

*Sa a nan-twou ki ap dirije pake yo disponib tou nan UV ki ap dirije, Amber dirije, jòn ki ap dirije, 5mm vèt nan-twou ki ap dirije, 5mm ble nan-twou ki ap dirije ECT.*

- nan -twou IR dirije radyan -

*Koulè nan foto a te pran pa kamera, tanpri pran aktyèl émettant koulè kòm estanda.

- nan -twou IR dirije paramèt -

Evalyasyon maksimòm absoli nan Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	70mw
Pulse Forward Current	IFP	500mA
Forward Current	IF	50mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5 Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Karakteristik optik ak elektrik ( t c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.1	1.2	1.4	V	IF=20mA
		1.3	1.5	1.7	V	IF=50mA
			2.2		V	IF=500mA
Rediant Intensitye	Ee		2	4	mw/sr	IF= 20mA
		8		12	mw/sr	IF=50mA
			92		mw/sr	IF=500mA
Luminous Power	PO		4		mw	IF=20mA
			15		mw	IF=50mA
			150		mw	IF=500mA
Peak Wavelength	λP		940	950	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Koneksyon fil an lò -

* Pou yo ka kenbe chak youn nan long validite ki ap dirije a, bestled faktori itilize segondè fil lò pi bon kalite pou anndan koneksyon sikwi

- IR ki ap dirije anbalaj -

*Nou ka pake sa a te mennen ak nenpòt ki kantite pakè ak kole oswa pliye broch yo ki ap dirije kòm kondisyon ou.