- Lanp enfrawouj ki ap dirije -

503FIRC-76L / 14I100-20A

- Gwosè 5 mm Atravè-twou ki ap dirije -

- Atravè-twou ki ap dirije radyan -

* Koulè nan foto a te pran pa kamera, tanpri pran aktyèl koulè emèt kòm estanda.

- Paramèt elektrik -

Evalyasyon maksimòm absoli nan Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	230mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Temperature	Topr	-40 - +80°C
Storage Temperature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5 Years
Anti-static bag	Piece	1000Back
1000pcs weight	Bag	0.31g
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Karakteristik optik ak elektrik ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.5	1.6	1.8	V	IF=20mA
			1.8	2.1	V	IF=60mA
			2.3	2.5	V	IF=100mA
Luminous Flux	Φ		0.3		lm	IF=20mA
			0.9		lm	IF=60mA
			1.1		lm	IF=100mA
Luminous Power	PO	15		25	mw	IF=20mA
				55	mw	IF=60mA
				90	mw	IF=100mA
Radiant Intensity	Ee	130		160	mw/sr	IF=100mA
Peak Wavelength	λP	755	760	770	nm	IF=20mA
Half Width	Dl		17		nm	IF=20mA
Viewing Half Angle	2q1/2		±10		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device

- Golden koneksyon fil -

* Yo nan lòd yo kenbe chak youn nan lavi ki dire lontan, faktori BestLED sèvi ak segondè fil pi bon kalite lò pou anndan koneksyon sikwi

- Ki ap dirije anbalaj -

* Nou ka pake sa a ki ap dirije ak nenpòt ki kantite pakè ak tep oswa koube broch yo ki ap dirije kòm egzijans ou.

- Ki gen rapò ak IR dirije -

- Pwosesis Pwodiksyon -

- T hrough-twou IR dirije -