- Infrared LED Lamps -

503FIRC-74L / 14I100-45A

Ba wai kawai 730nm infrared LED za a iya amfani da shi a cikin infrared LED therapy, amma kuma 730nm LED, 740nm LED, 760nm LED ana iya amfani dashi ko'ina a cikin nau'ikan injiniyar IR LED. Hakanan akwai nau'ikan kallon kallo akan wannan ta hanyar ramin LED don zaɓinku. Daban-daban kallon kallo zaiyi sakamakon haske daban-daban, zaku iya zaɓar ɗayansu don aikinku. Shin kuna buƙatar ɗan kwalliyar 740nm LED don aikinku? Tuntuɓi mu mu sani, wannan samfurin tare da tsawon rai tabbatacce mai dogaro da ƙarancin amfani da ƙarfi bazai bari ku kunya ba. Kamar yadda muka sani, LED infrared yana fitar da jan wuta lokacin da suke aiki. Kuna tsammanin duk LED infrared ba za su iya gani da idanunmu ba? Sannan kuna iya samun kuskuren wannan lamarin ~ Amma mafi tsawon zango, da ƙarancin jan wuta za ku hau. Kamar yadda muka sani, akwai ƙarfin ƙarfi lokacin da kuka yi amfani da laser diode na 740nm, dole ne kuyi amfani dashi a hankali in ba haka ba zaku ƙone kanku. Amma saboda wannan, mun shirya wannan tare da chiparar LED na 740nm da ruwan tabarau mai haske. Wanne ne kawai diode mai fitar da haske.

- Girman 5 mm Ta hanyar-rami LED -

- Haske ta cikin rami

* Kalar kamara ta ɗauki launuka a cikin hoto, don Allah ɗauki ainihin sigar fitar kamar daidaitacce.

- Parameter LED ta-rami -

Cikakkar Matsakaicin Matsayi A Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Hanyoyin Gano da Wutar Lantarki ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.4	1.6	1.9	V	IF=20mA
		1.8	1.9	2.3	V	IF=60mA
		1.9	2.0	2.5	V	IF=100mA
Luminous Flux	Φ		0.05		lm	IF=20mA
			0.12		lm	IF=60mA
			0.16		lm	IF=100mA
Luminous Power	PO	8		15	mw	IF=20mA
		20		35	mw	IF=60mA
		35		50	mw	IF=100mA
Radiant Intensitye	Ee	40		60	mw/sr	IF=100mA
Peak Wavelength	λP	735	740	745	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Haɗin waya na zinariya -

* Domin kiyaye kowane mai tsawon rayuwar LED, kamfanin BestLED yayi amfani da waya mai kyau ta zinare don haɗin kewaya

- Shiryawa na LED -

* Zamu iya ɗaukar wannan LED ɗin tare da kowane nau'in fakiti kuma muka ɗauka ko tanƙwara fil ɗin LED kamar yadda kuke buƙata.

- IR IR mai dangantaka -

- Tsarin Ayyuka -

- T h-rami IR LED -