- 625nm LED -

5050FRC-62L / 10

Common 5050 SMD LED hawwe 6 pins, d'r hawwe trije pins oan elke kant fan SMD LED. En elke pins sille in LED-chip binnen ferbine mei katode as anode. Lykas wy yn 'e foto sjen kinne, hawwe dizze 5050 SMD LED trije chip binnen, dizze trije chip as parallele ferbining binnen de SMD LED. Hokker kin 3 chips tagelyk wurde riden mei 60mA-stream. 5050FRC-62L / 10 is in 625nm LED SMD dy't binnen 3 245 * 245um hawwe, helderheid kin 1500-2500nm berikke as it wurket. Dominante golflingte is 620-625nm en peakgolflingte is 630-635nm. Dizze binne reade SMD LED mei hege helderheid, en krêft is 0.2W. Shenzhen Best LED Opto-electronic Co., Ltd kin ek 630nm liede, 635nm liede, 640nm liede, 645nm liede, 660nm liede, 680nm liede, 700nm liede, 710nm liede, 720nm liede, 730nm liede, 740nm liede, 750nm liede, 760nm liede led, 770nm led, 780nm led, 790nm led, 800nm ​​led, 810nm led, 820nm led, 830nm led, 840nm led, 850nm led, 860nm led, 870nm led, 880nm led, 890nm led, 900nm led, 9 20nm led, 940nm led , 950nm liede, 980nm liede, 1000nm liede, 1050nm liede, 1100nm liede, 1200nm liede, 1300nm liede, 1500nm liede ect. As jo ​​LED's dêroer nedich binne, nim dan kontakt op mei ús foar mear details dêroer ~

- Diminsje Parameters-

Dizze SMD LED-saak binne ek te krijen foar IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Emitting Color -

- Elektryske parameters -

Absolute maksimale wurdearrings by Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	180mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	60mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Optyske en elektryske skaaimerken ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.9	2.1	2.4	V	IF=60mA
			2.3	2.6	V	IF=180mA
			2.4	2.8	V	IF=300mA
Luminous Flux	ΦVI	6		9	lm	IF=60mA
				25	lm	IF=180mA
Luminous Intensity	IV	1500		2500	mcd	IF=60mA
Lumiuous Power	PO	35		55	mw	IF=60mA
				180	mw	IF=180mA
				300	mw	IF=300mA
Peak Wavelength	λP		632		nm	IF=60mA
Dominant Wavelenth	λd	620	625	630	nm	IF=60mA
Half Width	Dl		16		nm	IF=60mA
Viewing Half Angle	2q1/2		±60		deg	IF=60mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Gouden triedferbining -

- Ferpakking -

* Wy ferpakke it mei fakuümferpakking nei tape as in reel

- Oanfraach -

- Ferlykbere reade LED -

- Produksje -

- SMD LED-gebrûk -