- Infrapuna LED-lambid -

503FIRC-75L / 14I100-20A

- läbimõõduga 5 mm läbimõõduga LED -

* See läbimõõduga LED-pakendi suurus on saadaval IR-LED-is, UV-LED-is, merevaigukollases LED-is, kollases LED-is, sinises läbimõõduga LED-valgusdioodis jne. *

- Läbi ava LED kiirgav -

* Fotol olevad värvid võeti kaamera abil, palun võtke standardiks tegelik kiirgav värv.

- elektrilised parameetrid

Absolute Maximum Ratings At Ta=25℃  Parameter Symbol Rating Power Dissipation Pd  200mw  Pulse Forward Current IFP  300mA  Forward Current IF  100mA  Reverse Voltage VR 5V Junction Temperature Tj 115°C Operating Tempertature Topr -40 - +80°C Storage Tempertature Tstg -40 - +100°C Soldering Temperature Tsol 260°C Electro-Static-Discharge(HBM) ESD 3000v Warranty Time 5Years Antistatic bag Piece 1000Back *Pulse Forward Current Condition:Duty 1% and Pulse Width=10us. *Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C Optilised ja elektrilised omadused ( T c = 25 ℃ ) Parameter Symbol Min Typ Max Unit Test Condition Forward Voltage VF 1.5  1.6 1.9 V IF=20mA 1.6 1.8 2.1 V IF=60mA 1.9 2.0 2.5 V IF=100mA Luminous Flux Φ 0.08 lm IF=20mA 0.2 lm IF=60mA 0.25 lm IF=100mA Luminous Power PO 6 15 mw IF=20mA 20 35 mw IF=60mA 35 50 mw IF=100mA Radiant Intensity Ee 130 160 mw/sr IF=100mA Peak Wavelength λP 750 760 nm IF=20mA Half Width Dl 24 nm IF=20mA Viewing Half Angle 2q1/2 ±10 deg IF=20mA Reverse Current IR 10 uA VR=5V *Luminous Intensity is measured by ZWL600. *q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. *lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

* Iga LEDi pika eluea säilitamiseks kasutab BestLED tehas vooluühenduse ühendamiseks kõrge puhta kullaga traati

- LED-pakkimine -

* Me võime selle LED-i pakkida suvalise arvu pakenditega ja teipida või painutada LED-tihvte vastavalt teie nõudele.

- Seonduvad infrapuna LED-lambid

- tootmisprotsess -

- Läbivaava IR-LED -