5050FRYGIRC

Pobl sy'n defnyddio'r LED i newid egni ysgafn yn egni mewnol, a all hyrwyddo twf celloedd . Mae LED yn allyrru golau oer nad yw'n cynhyrchu twymyn uchel ac nad yw'n llosgi'r croen. Mae'n cael effaith sylweddol ar atgyweirio croen sy'n heneiddio, adnewyddu'r croen a gwynnu. Fel y gwyddom, mae tonfedd wahanol i wahanol liwiau LED, sy'n golygu, bydd tonfedd wahanol yn cael effaith wahanol i'r croen. Fel rheol, mae pobl yn defnyddio tonfedd fel LED glas 460nm, 470nm, LED melyn 580nm, LED 590nm, 630nm LED Coch, 660nm LED, 810nm LED, 830nm LED, 840nm LED ect ar gyfer y peiriant harddwch LED

Gall y ffatri LED orau becynnu gwahanol sglodion y tu mewn i'r LED fel eich gofyniad. Mae cynnyrch wedi'i addasu pob gwestai yn unigryw. Cysylltwch â ni a gwnewch eich dyluniad eich hun ar gyfer eich peiriant! A allwch chi addasu tonfeddi eraill? Wrth gwrs, dim problem. Cysylltwch â'n swyddfa werthu.

- Size: 5.0*5.0*1.0mm - Chip Number: 4 chips - Color:  660nm 580nm 530nm 830nm LED - Type: Surface mount device - Chip brand: Epistar

- Different color are available - Different wavelength are available - Warranty: 5 Years - RoHS, REACH, EN62471

- Uniform light output - Long life-solid state reliability - Low Power consumption -Anti UV epoxy resin package -High temperature resistance

- Paramedrau Dimensiwn -

Mae'r achos LED SMD hwn hefyd ar gael ar gyfer IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Paramedrau Trydanol -

Parameter	Symbol	Rating
		Red	Green	Yellow	IR
Power Dissipation	Pd	50mw	70mw	50mw	70mw
Pulse Forward Current	IFP	100mA	100mA	100mA	100mA
Forward Current	IF	30mA	30mA	30mA	30mA
Reverse Voltage	VR	5V	5V	5V	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Parameter		Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	Red	VF	1.9	2.0	2.4	V	IF=20mA
	Green		2.8	3.1	3.4
	Yellow		1.9	2.0	2.4
	IR		1.3		1.6
Luminous Intensity	Red	IV	500		700	mcd	IF=20mA
	Green		1200		1500
	Yellow		500		700
	IR		5		10	mw/sr
Peak Wavelength	Red	λP	650	660	670	nm	IF=20mA
	Green		520	530	535
	Yellow		580	585	590
	IR		820	830	840
Half Width	Red	Dl		18		nm	IF=20mA
	Green			25
	Yellow			18
	IR			22
Viewing Half Angle		2q1/2		±60		deg	IF=20mA
Reverse Current	Red	IR			5	uA	VR=5V
	Green				5
	Blue				5
	White				5
*Luminous Intensity is measured by ZWL600.
*2q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Cysylltiad Gwifren Aur -

* Er mwyn cadw pob un o hyd oes hir LED, mae ffatri BestLED yn defnyddio gwifren aur pur uchel ar gyfer cysylltiad cylched y tu mewn

- Pacio -

* Rydyn ni'n ei becynnu gyda phacio gwactod ar ôl ei dapio fel rîl

- 5050 LED SMD cysylltiedig -

- Cynhyrchu -

- Defnyddiwch -