- Infracrvene LED lampe -

503FIRC-82L / 14I100-45A

- Veličina 5 mm LED kroz prolaz -

- LED zračenje kroz rupu -

* Boje na fotografiji snimila je kamera, standardno uzmite stvarnu boju koja emitira.

- Parametar LED kroz rupu -

Apsolutni maksimalni rejting pri Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Optičke i električne karakteristike ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.3	1.5	1.6	V	IF=20mA
		1.4	1.6	1.8	V	IF=60mA
		1.5	1.7	2.0	V	IF=100mA
Luminous Flux	Φ		0.007		lm	IF=20mA
			0.02		lm	IF=60mA
			0.03		lm	IF=100mA
Luminous Power	PO	8		18	mw	IF=20mA
		28		40	mw	IF=60mA
		48		60	mw	IF=100mA
Radiant Intensitye	Ee	40		70	mw/sr	IF=100mA
Peak Wavelength	λP	812	820	830	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Za razliku od 850nm i 830nm IR LED-

- Zlatna žica -

* Kako bi zadržao svaki dugi životni vijek LED-a, tvornica BestLED koristi žicu od čistog čistog zlata za unutarnju vezu kruga

- LED pakovanje -

* Ovu LED možemo spakirati s bilo kojim brojem paketa i zalijepiti ili saviti LED iglice kao vaš zahtjev.

- Povezane infracrvene LED lampe -

- proizvodni proces -

- IR LED sa T rupom -